Rubber-to-Metal Bonded Components
Rubber-to-Metal Bonded Components
Rubber rollers, plain and grooved wheels, mountings with bolt or metal plate, and stud mounts, with rubber bonded to metal so the two work as one part.
What to send for a quote
- Drawing of the metal part and the rubber section
- Rubber hardness, if specified
- Load, speed or movement the part takes
- Exposure to oil, water or weather
- Quantity now and per month
Types we make
Add the types you need to one enquiry and send them together. Every type is also made to your drawing or sample.
| Image | Type | Enquiry |
|---|---|---|
 | Rubber rollersRubber-covered rollers on metal shafts | |
 | Rubber wheels, plainWheels for trolleys and equipment | |
 | Rubber wheels, groovedGrooved wheels for guides and rails | |
 | Rubber mountings with boltBolted mounts for machines and lifts | |
 | Stud mounts, one sideThreaded stud on one face | |
 | Stud mounts, both sidesThreaded studs on both faces | |
 | Rubber mountings with metal plate, bigRubber block bonded between two plates | |
| | Rubber mountings with metal plate, smallCompact plate-bonded mounts |
About these parts
In a bonded part the rubber is moulded onto a metal insert, plate or shaft and fixed to it chemically. The bond lets the rubber carry load, grip or roll without slipping off the metal. Mangal also bonds rubber to wood and engineering plastics.
Used in
Compounds commonly specified
| Compound | Typically chosen for |
|---|---|
| NBR | Oil and grease contact |
| Neoprene (CR) | General duty and outdoor use |
| EPDM | Water and weather |
Typical industry guidance; the compound for your part is confirmed with the quotation. Compare compounds
Not listed? We make it to your drawing or sample.
Send the drawing, the old part or a photo with sizes.
Common questions
What is rubber-to-metal bonding?
The rubber is moulded directly onto a prepared metal part and bonds to it during curing, so the rubber and metal act as one part and cannot slip apart in use.
What can rubber be bonded to?
Mostly steel inserts, plates, shafts and hubs. Mangal also bonds rubber to wood and engineering plastics.
What do you need to quote a bonded part?
A drawing of the metal part and the rubber, the hardness if your drawing specifies one, the load or movement, and the quantity.
Related products
Quote for rubber-to-metal bonded components
Part, quantity and your WhatsApp number are enough to start. Add drawings on the next screen.
- Custom to your drawing or sample
- Drawings can be attached on the next screen: PDF, DWG, DXF, STEP, JPG or PNG
- Used only to quote and make your parts. Privacy